Connection to the Power:
1. Connect to the computer or power bank with the USB cable.
2. Plug into the socket by USB cable with 5V 1A adapter
(Adapter not included).
Cleaning:
1. To prevent damage to the electronics, do not submerge
the toy in water. Only use a soft damp cloth to clean the toy.
2. Protect the toy against heat, dust, sand, and water.
3. Products are to be disconnected from the transformer
before cleaning.
Cautions:
1. Products must be used with the suitable AC adaptor
(output: 5VDC, 1A) when you plug into the socket.
2. When using this product, please do not place it on an
unstable surface incase of falling and breaking.
3. For better and clearer projection effect, this product
uses super bright LEDbeads.Please do not closely
stare at the lamp for a long time to avoid dizziness.
4. The lampshade is not resistant to high temperature,
please don't place theprojector in a high-temperature
place, otherwise th
e fi
lm will be deformed.(Eg: in the
sun or under glass windows).
Warning:
1.Not suitable for children under 36 months. Small Parts.
Choking hazard. For your child's safety. Please read
these instructions and keep them for future reference.
2.To prevent the risk of strangulation: Do not place in bed
or child's sleeping environment. Do not attach strings or
straps to the toy.
3.Toys must only be used under adult supervision.
4.Remove and discard all packaging and packaging
fasteners before giving this product to a child.
5.Do not use the product if any components are broken
or missing.
6.Before each use, ensure that the product and all its
components are not damaged. lf damaged or broken,
immediately discard the toy.
7.Don't use accessories or replacement parts other than
those approved by Moredig.
8.The USB cable is not a toy.
9.Please keep the lamp and all appliances dry and clean,
don't touch an electrical appliances with wet hands or
when liquids are present.
-3-