4. Turn the seat over and, from the back, free the
belt buckle
(7)
by passing the retention plate
(24)
through the slot in the seat (fig. 6).
5. Remove the belt buckle and save it in the
storage bag.
6. Take out the harness straps retention plates
(22)
located in the bottom of the seat, under the
plastic white plate by pulling the strap, take it
out
(24)
(fig. 5).
7. Take off the harness straps by pulling them out
of the seat.
3.6. Removing the cover
A) Headrest.
fig. 4
fig. 5
22
21
21
fig. 6
23
1. Adjust the headrest to its highest position.
2. First remove the part of the cover that includes
the safety belt guide
(2)
followed by the
remainder of the headrest cover.
B) To remove the 5-point harness, see point 3.5.
Remove the back and base covers.
3.7. Putting the cover back on
Follow the same steps in reverse order.
IMPORTANT!
Never use the safety seat following
the installation instructions described in point 5
without having a correctly installed buckle. Make
sure the metallic plate
(24)
is properly secured.
19
17
3.8. Adjusting the harness height
Proper adjustment of the height of the harness
ensures the child will be seated correctly. The
harness should be adjusted to the height of the
child’s shoulder or slightly above; never behind
the child’s back or level with the ears (fig. 10).
1. Loosen the harness straps by pulling them
gently while pressing the harness adjustment
button
(13)
(fig.2).
2. Loosen the harness straps from the back of the
seat, freeing them from the harness connector
(18)
(fig. 3 y 4).
3. Loosen the shoulder pad straps
(3)
from the
back of the seat, freeing them from the shoulder
pad straps connector
(20)
(fig. 3 and 4).
4. Pull the harness straps from the front to free
them from the seat back.
5. Reinsert the harness straps at the desired
height using fig. 7 as a guide.
6. Reinsert the harness straps in the connector on
the back of the seat (fig. 8).
¡IMPORTANT!
ensure the straps are not twisted at any point.
fig. 8
fig. 7
0-6 kg
6-13 kg
13-18 kg
26
27
