Morco EUP11RS, Руководство пользователя по установке и обслуживанию

Страница: 2 / 20

QUICK-START GUIDE
POWER ON
Switch the mains electricity supply on to the appliance.
WATER TEMPERATURE ADJUSTMENT
Turn the control knob to the right to increase the temperature and
to the left to decrease it.
POWER OFF
Press and hold the on/off button . As soon as the symbols
begin to flash, release the button.
The appliance will be in the OFF state, the display shows .
RESET – to reset fault codes
Press and hold the reset button . As soon as the display shows
the wording
release the button.
If the fault persists, please contact a Gas Safe Engineer or other
qualified person.
Button for
power on/power off/reset Control knob
water temperature
When the product has reached the end of its
serviceable life, it shall be disposed of in an
environmentally friendly way and disposed of
according to the regulations in force.
Separate collection and recycling of the pro-
duct avoid negative impact for environment
and health, and allows recovery of materials,
in order to obtain energy and resources
saving.
WARNING
This booklet contains information relevant to the user as
well as the installer.
The user must read the following chapters: General
Safety, Flue gas device and Operation.
Table of contents
CERTIFICATION 3
GENERAL WARNING AND SAFETY 4
DESCRIPTION OF THE APPLIANCE 5
USE OF THE APPLIANCE 5
COMPONENTS AND DIAGRAMS 7
INSTALLATION 9
TECHNICAL DATA 14
FAULT CODES 15
WINTERISATION 17
WARRANTY AND EXCLUSIONS 18