To charge the powerstation go rugged AC, use the provided Wall Charging Adapter, and plug the provided
USB Type-C cable into the charging port. Next, connect the wall charging adapter into a wall outlet. The
powerstation go rugged AC will automatically begin charging. When the powerstation go rugged AC is fully
charged, all five battery indicator bars will be solid white and the digital screen will indicate 100% charged.
This could take up to 9 hours).
NOTE:
• The powerstation go rugged AC is designed to charge between 32°F-113°F (0-45° C). A “TEMP”
indicator will be illustrated on the digital display if the powerstation go rugged AC is attempted to be
charged outside of this temperature range.
• While charging, the digital screen will illustrate the charge percentage of the powerstation go rugged
AC. When fully charged, disconnect the cable.
Jump starting a vehicle
1. Plug the jumper cables into the jump-start output on the powerstation go rugged AC.
NOTE: Make sure the jumper cables are fully plugged into the jump-start output before trying to jump
start your vehicle.
2. Attach the jumper cable clamps to the vehicle battery.
• Red clamp on positive terminal (+)
• Black clamp on negative terminal (-)
NOTE:
• Once the jumper cable clamps are attached to the vehicle battery, the LCD will display the vehicle
battery voltage.
• Do not touch red (positive) and black (negative) clamps together at any point. If the jump start
button flashes red, the jumper cables have been connected incorrectly. If this flashing red condition
occurs, disconnect the jumper cables from vehicle battery and restart the process from Step 1.
Figure 1
Figure 2
Figure 3
