Mopedia RS992 Series, Инструкция по эксплуатации

Страница: 17 / 36

5
ENGLISH
7. GENERAL DESCRIPTION
7.1 View and List of Components
RS992X – Overbed table with wheels,
painted steel frame, manual regulation
A. Big screw – 2pz
B. Small screw – 2pz
C. Semicircles on small table – 1pz
D. Perforated plate – 1pz
E. Big table – 1pz
F. Base – 1pz
G. Castors – 4pz
H. Column - 1pz
RS997X – Overbed table with wheels,
painted steel frame, automatic regulation
A. Big screw – 2pz
B. Small screw – 2pz
C. Column - 1pz
D. Perforated plate – 1pz
E. Base – 1pz
F. Castors – 4pz
8. ASSEMBLING/DISASSEMBLING
8.1 Assembling
RS992X – Overbed table with wheels, painted
steel frame, manual regulation
1. Unpack the product and check that the content
matches with the description of the parts in
the manual. Assemble the four castors.
2. Assemble the column using the perforated
plate (fig. D), the two big screws (fig. A) and
lock them with the big Allen wrench.
3. Assemble the small tray with the small screws
(fig. B) using the Allen wrench.
4. To assemble the bigger tray, insert it in the
projecting tube of the tray. Do not put them
closer to each other.
5. Insert the spring of the handles (fig. C) between
two semicircles.
6. Put the trays closer to each other, insert the
locking screw and fix it with the handle.
7. By turning the handle, the big tray can rotate.
Tighten the handle again to block it at the
required inclination.
8. Now the overbed table is ready for use.