17
ENGLISH
ENGLISH
of the person, where it is required a limitation of the load on one or both lower limbs.
7.1 To adjust height
To adjust the height, press the push button and slide the cane to the desired
height. Be sure the push button is fully protruded through the desired hole
when finished. Repeat described procedure for each leg, at the end, check all
four legs have the same height.
8. BEFORE USE
•Always check that the brakes work before using the walker, if available;
• Do not use the walker if it is damaged or malfunctioning please contact retailer for repaing;
• Check if the frame is damaged in order to guarantee a safe use for people and things;
• Users must travel along pedestrian paths and not on busy roads;
• Pay attention to the possibility of injury from entrapment; avoid placing your fingers between
the moving parts of the walker. Pay attention closing and opening the walker.
9. WARNINGS FOR USE
This device provides greater stability, support and safety while moving. In any case, it can not
be used by people with a functionality of the hand and / or arm visibly weak and even by people
with balance problems. The walker can be used both outside and inside. We recommend using
only on surfaces on which all four legs touch the ground. It should not be used on rocky terrain
or on inclined surfaces because the walker can become unstable. The device is not designed for
the transport of persons or other material
• Use extra caution on wet and slippery surfaces;
• DO NOT use with patient who exceed the weight indicated in the product label and in the
technical features chapter of the present manual;
• Avoid use on slopes greater than 10 degrees and turn around on uphill or downhill the
disabled must be assisted by an operator
• Avoid to leave the device in contact with water for long periods of time;
• Periodically check its sturdiness, the stability and the rubber tips are in good conditions.
Replace them once worn out;
• In case of doubts about use, adjustment or maintenance, contact your dealer;
• Keep it away from children to avoid any possible risks;
10. ASSEMBLY INSTRUCTIONS RP729X
Parts list
1. Main Frame (1pc)
2. Legs (2pcs)
3. Bent tube (1pc)
4. Assembly Kit (1pc)
