MOPEC BF840 Room Filtration Module
MOPEC BF840
PAGE
8
How to change filters:
BF023 Merv13 Pre-filter:
Open the cover by pulling upward on the handle. The Pre-filter can be lifted out of the
holder and replaced by new media. The media should be firmly inserted into the holder
frame so that it seats to the bottom of the frame
.
The arrow on the filter should point
towards the inside of the module. See photo below
BF014 Combination Potassium and Charcoal Filter
With the cover open simply pick up the black plastic filter casing and dispose of in
accordance with your hospital guidelines. The new filter is placed in the unit with the
opening of the filter towards the top of the unit as shown in the above photo. See
Cleaning and maintenance section on how to check the filter for replacement.
