12. Grab the vacuum hose (C) and place the large end into the vacuum unit aluminum
socket on top, and connect the small end into the silicon hood.
13. Use the 6 black tube clips to attach the saw cable to the vacuum hose at regular
intervals. Once the main power unit is plugged into an electrical outlet, the yellow button
on the Mopec Swordfish will control both the oscillation saw and the vacuum unit. When
switched off, the vacuum will continue to run for a few seconds to clear any debris in the
vacuum hose.
14. The paper filter should be changed daily after usage as per the operating manual.
Please consult the manual for filter changes and maintenance.
8
