7
Custom Harness Installation
Ignition switch connector
A. Locate ignition switch connector,
directly behind the ignition switch.
Release the secondary lock. While
pushing on main release, remove
connector from ignition switch.
B. Connect the harness 5-way female
connector to the vehicle’s ignition
switch.
C. Connect the harness 5-way male
connector to the vehicle’s 5-way
ignition connector previously
removed from the ignition switch.
Ground
D. Using a supplied 1/4” screw,
secure the black ground wire with
ring terminal to the metal under
dash brace as shown in diagram.
Parking Light Connection
E. Locate the White/Violet wire in pin
#12 of the 26-way white connector,
found low in the left kick panel
area. Center-splice the harness
Yellow wire into this wire, following
the center-splice procedure as
shown.
Center-Splice Procedure
