Hood Switch Harness Installation
1. Access the bottom of the TIPM
a. Access the connectors at the bottom of the
TIPM by releasing the (3) locking tabs in the
corners of the TIPM and lift upwards.
2. Routing and connection of the hood
switch harness
a. Route the hood switch harness connector
through the opening in the fender, next to the
factory harness.
Hood Switch Harness
Factory Harness
Locking Tabs
Disconnect Ground From Battery
1. Remove ground from battery
a. Using a 10mm socket remove the negative battery cable.
3 of 11
