Audio System Upgrade Package
2005-2009 Chrysler 300C
Installation
Instructions
77KICK02
9/22/2008
Page 2 of 7
© 2007, Chrysler, LLC. Mopar is a registered trademark of Chrysler, LLC. All rights reserved.
1.
Remove the lower rear seat cushion by pulling up on the front edge.
2.
Fold rear seat backs into the down position.
3.
Remove the 10mm bolt securing the side portions of the seat. Fig. 1
4.
Release the spring clip on the back of the side cushion. Insert a putty knife behind the side cushion
and push down firmly while pulling forward on the cushion. Fig. 2
Fig. 2
Fig. 1
Fig. 2
5.
To remove the rear package tray, first remove the plastic retainer in the center. Remove the
package tray by pulling it away from the rear glass. Fig. 3
6.
If the car is equipped with a eight speaker Boston Acoustics
®
system find the subwoofer mounted in
the rear deck and remove the four screws securing it in place. Save the screws for reinstallation
later.
7.
If the car is not equipped with the Boston Acoustics
®
system the hole will be covered by a self-
adhesive sound damping material. Remove the damping material and save for reinstallation later.
Fig. 4
Fig. 3
Fig. 4