MAN199_0
www.moosesound.com
5
Connections and Controls
11. CHANNEL 1 INPUT:
Channel 1 signal input in 3-pin XLR. This is the input to be used if the amplifier is to be
used in BRIDGE mode.
12. CHANNEL 2 INPUT:
Channel 2 signal input in 3-pin XLR.
13. CHANNEL 1 INPUT:
Channel 1 signal input in Jack ¼’’. This is the input to be used if the amplifier is to be used
in BRIDGE mode.
14. CHANNEL 2 INPUT:
Channel 2 signal input in Jack ¼’’.
15. CHANNEL 1 SPEAKER:
Channel 1 Speakon loudspeaker connectors. The Speakon connector is designed
specially for highpower speaker connections.
16. CHANNEL 2 SPEAKER:
Channel 2 Speakon loudspeaker connectors. The Speakon connector is designed
specially for highpower speaker connections.
17. BRIDGE:
Speakon loudspeaker connector to be used if the amplifier is set to be operating in BRIDGE mode.
Please refer to the pinout printed on the rear panel of the amplifier.
18. SIGNAL GROUND LIFT/GROUND:
Signal ground lift barrier strip. Ground lift means breaking a connection
between chassis earth and electrical earth. Use this feature only when 50Hz hum is excisting from loudspeakers.
19. FUSE:
Power fuse.
20. MAINS SUPPLY:
Replace the fuse only with a fuse of the same type and rating. If the fuse blows repeatedly,
please contact an authorised service company.
Power cable AC 230V - 50~60Hz.
Professional power amplifiers
CA1000 & CA2000
+1
+1
-2
-2
+2
+2
-1
-1
XLR- type, JACK-type and SPEAKON-type connector pin-assigment:
Stereo:
Bridge:
Balanced XLR Male Connector
2
3
1
POSITIVE (+)
GROUND
NEGATIVE (-)
Balanced ¼” Jack Connector
4-pin Speakon Connector
SIGNAL ( + )
SIGNAL ( - )
MASSA
GROUND