STEP 1
UPDATED AS OF: 09/14/2021
4 of 7
Measure your board dimensions and draw an outline of where the board will be located
on your wall. Predrill holes for wall mount clips at the locations shown below. Drill 1/8”
holes where studs are located and 1/4” holes when drilling into drywall. If installing
board in masonry drill only 1/4” holes. For 6 ft or 8 ft boards see next step for additional
predrill placement.
STEP 2
For 6 ft and 8 ft long boards add holes for additional wall mount clips along long edges
of boards. 6 ft boards will get two additional clips and 8 ft boards will get four additional
clips equally spaced as shown. Spacing from top, bottom, and left and right edges of
boards will be the same as previous step.
Top Edge of Board
Bottom Edge of Board
6”
3/4”
6”
3/4”
1 1/4”
1 1/4”
6”
6”
3/4”
3/4”
4’ x 6’
4’ x 8’
4’ x 6’
4’ x 8’
