Moore Unidrill-W Series, Руководство пользователя

Страница: 9 / 46

ADDITIONAL GENERAL SAFETY RULES
(SUPPLEMENT TO MAIN INSTRUCTION BOOK)
1.
Additional care must be taken with H.P. Drills due to the increased
transport height . Good driving sense in avoiding low obstacles
especially overhead power lines and cables, bridges, trees and other
factors which may effect transport and use of H.P. Drills.
2. Always unfold H.P. Drills in raised position with transport pins
engaged and
mechanical wing locks dis – engaded trying to
unfold wings whilst transport locks are still engaged can damage
main frame.
3. Always transport H.P. Drills with hopper empty, and do not exceed
25km/h.
4.
Never operate bout markers unless area is clear.
HITCHING
1.
Attach tractor to drill using pick up hitch or clevis.
2.
Attach the pipes of the hydraulic fan to the tractors priority valve (if
fitted) a cap fitted with a chain identifies the pressure hose.
The return hose must have unrestricted return access to hydraulic tank
(i.e ‘dump valve’), otherwise damage may occur . If in doubt refer to your
tractor supplier.
3.
Attach the hoses for the Head Land Control (HLC) system, Must be
fitted to double acting spool.
4.
Connect HLC hand grip onto the spool lever that is being used to run
HLC system.
5.
Connect HLC hand grip cable to the cable from the HLC control box.
6.
Connect the other cable from the HLC control box to the tractors
standard 12V power source.
7.
Connect the cable from the tram – lining system to the tractors 12V
Supply.
8.
Connect lighting cables and braking hoses to the appropriate places.
9