12
TSM14POE Hardware Manual
920-0153 A
01/23/2020
Once you’ve chosen an appropriate IP address for your drive, set the rotary switch according the
address table above. If none of the default addresses are acceptable for your network, you can
enter a new table of IP addresses using Step-Servo Quick Tuner software. If your network uses
addresses starting with 192.168.0, the most common subnet, you will want to choose an address
from switch settings 4 through E. Another common subnet is 192.168.1. If your network uses
addresses in this range, the compatible default selections are 1, 2 and 3.
If your PC address is not in one of the above private subnets, you will have to change your subnet
mask to 255.255.0.0 in order to talk to your drive. To change your subnet mask:
1. On Windows XP, right click on “My Network Places” and select Properties. On Windows 7, click
Computer.
Scroll down the left pane until you see “Network”. Right click and select Properties. Select “Change
adapter settings”.
2. You should see an icon for your network interface card (NIC). Right click and select Properties.
3. Scroll down until you see “Internet Properties (TCP/IP)”. Select this item and click the Properties
button. On Windows 7 and Vista, look for “(TCP/IPv4)”.
4. If the option “Obtain an IP address automatically” is selected, your PC is getting an IP address
and a subnet mask from the DHCP server. Please cancel this dialog and proceed to the next section
of this manual: “Using DHCP”.
