MOON 260D CD Player
SimLink™
The SimLink™ provides communication features between various MOON components. For example, if you were to connect
the 260D to the 250i via the SimLink™, pressing the
X
(play) button on the 260D will cause the 250i to automatically
switch to the input labelled ‘CD’. A second feature of SimLink™ involves the “Standby” function. By pressing down and
holding the “Standby” button for 2 seconds on the either the 260D or 250i, both units will go into “Standby” mode. The
same logic applies when switching from “Standby” to active mode.
The connection rules for the SimLink™ are very basic. You must always connect the supplied cable between one component’s
“SimLink™ Out” jack and another component’s “SimLink™ In” jack. If you inadvertently connect the cable between either two
“SimLink™ In” or two “SimLink™ Out” jacks, the SimLink™ communication feature will not function. Also, there is no master
component in a SimLink™ chain; no one particular component operates as the main communications controller.
Operating the 260D
We recommend that you leave your MOON 260D CD Player powered up at all times to maintain optimal performance. In the
event that you plan to be away from your home for a few days, powering off the CD Player may not be a bad idea. Once fully
“broken-in”, please keep in mind that your 260D will require several hours of playing time before it reaches its peak
performance after you’ve powered it up again.
Making the AC Connection
Connect the supplied AC power cable to the IEC receptacle, located on the rear panel of the integrated amplifier’s chassis.
Ensure that the AC wall outlet you use has a functioning ground. For the best sonic performance, it is preferable that you
plug your MOON 260D directly into a dedicated AC outlet and avoid using an extension cord. In order to obtain the
maximum performance from your audio system, we strongly recommend that the detachable power cord not come into
physical contact with any of the interconnect and speaker cables running to and from your 260D. In the event that this can’t
be avoided, you should ensure that any cables coming into contact with each other are crossed at a ninety degree angle to
minimize the contact area.
Turning on your MOON
260D
for the first time
Prior to turning this CD Player on for the first time, make sure that every cable is properly connected to avoid any problems.
Then turn on your CD Player in the following manner:
1)
Flick the main rocker switch labeled “POWER” to the ‘1’ (on) position on the rear panel.
2)
Press the push button labeled “Standby” on the 260D, the blue LED will confirm operation and the digital
display will show ‘no disc’. You are now ready to load a compact disc and begin listening to music.
On and Off Sequence
To avoid having any annoying noises (i.e. “thumps” and “pops”) emanate from your speakers when powering your 260D on
or off, you should
1)
Always power up your 260D CD Player before powering up your preamplifier and/or integrated amplifier.
2)
Always power down your 260D CD Player after powering down your preamplifier and/or integrated amplifier.
___________________________________________________________________________
Operating the 260D
9
Содержание Neo 260D
Страница 1: ...Owner s Manual MOON 260D CD Player...
