MOON 380D Digital-to-Analog Converter
Introduction
Your MOON 380D Digital-to-Analog Converter incorporates many innovative significant design features to achieve its “world
class” level of performance. This is an abbreviated list of the more important features:
ESS Technology SABRE
32
Ultra DAC/Digital Filter (ES9016) working in 32-bit Hyperstream™ to achieve
unprecedented jitter immunity and low-level linearity via a patented Time Domain Jitter Eliminator.
Digital Audio Signal Processing using M-AJiC32 (MOON Asynchronous Jitter Control in 32-bit mode)
Eight (8) digital inputs (AES/EBU x 2, S/PDIF x 3, TosLink x 2 and USB x 1) allowing for a connection to virtually any
digital source, along with one (1) digital output – S/PDIF
Optional MiND (MOON intelligent Network Device) module (9
th
input) via WiFi or Ethernet input for multi-room streaming
Optional variable analog outputs (balanced & single-ended) using M-eVOL volume circuit which was originally developed
for the MOON Evolution series. Accessible using the remote control, this volume operates in 1dB increments. M-eVOL is
based on a resistive array configuration with no sonic degradation of the audio signal at all volume settings.
Full digital monitor loop on S/PDIF to accommodate external devices such as a room correction component
Separate digital and analog power supplies, each using a toroidal transformer and 11 stages of voltage regulation
“Dual Jitter Control System” producing a digital signal that is virtually jitter-free, measuring below “1 picosecond” as
well as ensuring compatibility with virtually any digital device
USB input with galvanic isolation which eliminates all ground current (i.e. no electrical connection) between the USB
device (computer,music server, etc) and the 380D, preserving the accuracy of the audio signal.
RS-232 port for (i) full unsolicited bidirectional feedback and (ii) firmware updates; 12 Volt trigger output for remote
operation and IR input for external control with aftermarket infrared remote control receivers
Four-layer pure copper circuit PCB tracings; The advantages include better ground and power supply circuit layouts
resulting in a much shorter signal path and dramatically improved signal-to-noise ratio.
Rigid chassis construction to minimize the effects of external vibrations.
Accurate matching of the very finest quality electronic components in a symmetrical circuit design.
Designed to be powered up at all times for optimal performance.
Installation & Placement
The MOON 380D requires only minimal ventilation to maintain an optimum and consistent operating temperature. However,
you should avoid placing it near a heat source as this could compromise the Digital-to-Analog Converter’s performance and
reliability. As well, it should be placed on a solid level surface. The 380D uses toroidal transformers; even though they are
well shielded, you should not place the Digital-to-Analog Converter too close to source components sensitive to EMI, such as a
turntables.
In the event that your MOON 380D is equipped with the “MiND Music Streamer” option and you intend to use its wireless
streaming feature (between your wireless router and your 380D), you must install the included Wi-Fi antenna on the back
panel by screwing it into the socket labelled “WIFI ANT”.
____________________________________________________________________________________
Introduction
6
