moon 380D Neo Series, Руководство пользователя, Страница: 7 / 16

Owner’s Manual
7
Unpacking
The Nēo 380D should be removed from its box with care.
The following accessories should be included inside the box with your Digital-to-Analog Converter:
9
AC power cable
9
‘CRM-2’ remote control with two ‘AA’ batteries
9
‘SimLink™’ cable with 1/8” mini plug terminations on each end
9
Wi-Fi antenna for “ MiND” Music Streamer equipped version of the Nēo 380D
9
This owner’s manual
9
Warranty and product registration information (USA and Canada only)
Once the Nēo 380D is unpacked, inspect it thoroughly and report any damage to your dealer immediately. We
suggest that you keep all of the original packaging, storing it in a safe, dry place in case you’re required to
transport this product. The customized packaging is specially designed to protect the
380D from any potential
damage during transit.
Please write the serial number of your new
Nēo 380D in the space provided below for future reference.
Serial Number
Installation & Placement
The Nēo 380D requires only minimal ventilation to
maintain an optimum and consistent operating
temperature. However, you should avoid placing it near
a heat source as this could compromise the Digital-to-
Analog Converter’s performance and reliability. As well,
it should be placed on a solid level surface. The
380D
uses toroidal transformers; even though they are well
shielded, you should not place the Digital-to-Analog
Converter too close to source components sensitive to
EMI, such as a turntables.
In the event that your Nēo 380D is equipped with the
“ MiND ” Music Streamer option and you intend to use its
wireless streaming feature (between your wireless
router and your
380D ), you must install the included
Wi-Fi antenna on the back panel by screwing it into the
socket labelled “WIFI ANT”.
For Nēo 380D’s equipped with the optional
“MiND” Music Streamer, please visit our
website to download PDF versions of both the
“MiND Setup Guide” and “MiND App User
Guide”.
If you intend to use the Nēo 380D’s USB input
connection (PCM or DSD) with a Windows-
based computer, you will need to install our
USB HD DSD driver, which can be downloaded
from the support section of our website.
Note: Apple-based computers don’t require this
driver.