220i Integrated Amplifier
____________________________________________________________________________________
6
Unpacking
The
N
ē
o 220i
integrated amplifier should be removed from its box with care.
The following accessories should be included inside the box with your integrated amplifier:
9
AC power cable
9
‘CRM-2’ remote control with two ‘AA’ batteries
9
This owner’s manual
9
Warranty and product registration information (USA and Canada only)
Once the
N
ē
o 220i
is unpacked, inspect it thoroughly and report any damage to your dealer immediately. We suggest that
you keep all of the original packaging, storing it in a safe, dry place in case you’re required to transport this product. The
customized packaging is specially designed to protect the
220i
from any potential damage during transit.
Please write the serial number of your new Simaudio
N
ē
o 220i
in the space provided below for future reference.
Serial No.
: ________________
Installation & Placement
The
N
ē
o 220i
Integrated Amplifier requires reasonable ventilation to maintain an optimum and consistent operating
temperature, especially since it will radiate heat when driven hard. Consequently, it should be placed in a location with empty
space around it for proper heat dissipation. You should never place another component on top of this integrated amplifier. As
well, it should be placed on a solid level surface. You should avoid placing it near a heat source or inside a closed cabinet that
is not well ventilated as this could compromise the amplifier’s performance and reliability. The
220i
uses a large toroidal
transformer in its power supply; even though it is well shielded, you should not place this integrated amplifier too close to
source components sensitive to EMI, such as turntables, phono preamplifiers and CD Players. Finally, y
ou should never place
another component directly on top of this integrated amplifier.
