30
En
v
elope Reset OFF
En
v
elope Reset ON
FILTER ENVELOPE RESET
When Filter Envelope Reset is turned on, each new note
triggers the filter envelope to reset from zero, so its
output sweeps fully from zero to maximum with each
attack. By default, with envelope reset turned off, an
envelope Attack sweeps the envelope output only from its
current level to maximum. The effect of Envelope Reset is
more prominent with longer attack and release times.
To change this function, engage Shift mode and press
the
BANK 3
and
PATCH 2
buttons. Pressing the low C
key turns Filter Envelope Reset off, and pressing C#
turns it on.
FILTER ENVELOPE REPEAT
Normally, an envelope occurs just once when you play a
note. It’s possible, however, to use the filter’s envelope
generator as a multistage LFO for controlling cutoff,
pitch, or waveform. When filter envelope repeat is
enabled, then the delay, attack, hold, decay, and release
stages will loop continuously for as long as the note is
held. The shorter the envelope times, the faster the loop
will repeat.
To turn on filter envelope repeat, enable Shift mode, press
the
BANK 3
and
PATCH 3
buttons, and press the C# key.
Pressing the C key turns off filter envelope repeat.
FILTER ENVELOPE KEYBOARD AMOUNT
When filter envelope keyboard tracking is enabled,
the filter’s envelope times will respond to how high or
how low you play on the keyboard. Engage Shift mode,
press the
BANK 3
and
PATCH 4
buttons, and press any
key besides low C to make the filter envelope track the
keyboard. The higher the key you press, then the more
keyboard tracking will affect envelope times. Engage
Shift mode, press the
BANK 3
and
PATCH 4
buttons,
and press low C to turn off keyboard tracking.
FILTER ENVELOPE GATE
You can control whether the filter envelope is triggered
by the keyboard, by an external control-voltage source,
by both, or whether the envelope is always on. Engage
Shift mode and press the
BANK 3, PATCH 1,
and
PATCH
2
buttons. Pressing the low C key leaves the gate open
and bypasses the envelope generator. When you press
C#, only the keyboard or a MIDI signal will trigger the
envelope. When you press D, only a gate signal routed
from an external source to the
GATE CV
jack will trigger
the envelope. When you press D#, the keyboard, a
MIDI signal, or an external gate signal will trigger the
envelope (default).
En
v
elope Repea
t OFF
En
v
elope Repea
t ON
K
e
yboar
d T
racking OFF
G
a
te Open (Alw
a
y
s On)
G
ate
C
V
KB or MIDI
KB, MIDI, or G
a
te C
V
