Moog Slim Phatty, Руководство пользователя

Страница: 19 / 4103

Page 20
Slim Phatty User’s Manual -­ The Components
Page 21
Slim Phatty User’s Manual -­ The Components
G. Interface Panel
The Interface Panel is located on a far left of the instrument. The
Interface Panel provides a status display and controls for all of the
Slim Phatty’s software functions and instrument settings.
The status display is an LCD screen located in the center of the
panel above the section controls. When the SP is first powered on,
the screen will display the message:
Slim Phatty
Version X.x
The message will stay on the screen for a few seconds, and then
the screen will display the active preset. This preset will be the last
preset in use when the Slim Phatty was powered down.
Section Controls:
Master:
Pressing the
MASTER switch places you in Master mode. In this mode, the VALUE knob is used to scroll
through the Master mode menus for the Slim Phatty. For a list of the Master mode menus, see page 26.
Preset:
Pressing the
PRESET switch places you in Preset mode. In this mode, the VALUE knob is used to select the
preset. The PRESET switch also functions as ‘compare’ button, allowing you to toggle between stored and
edited presets. For more on Preset Mode, see page 23.
Value:
The
VALUE knob is a continuous rotary encoder used to access menus and options, and select presets.
Depending on the selected parameter, the VALUE knob will adjust numeric values UP or DOWN, or toggle
amongst discrete options. The encoder has a built-in push button (called the VALUE pushswitch) that is
used to advance through the presets in Performance Sets and for stepping though Master menu submenus.
When naming a preset, the
VALUE
pushswitch will advance the cursor to the next letter.
Cursor:
The
CURSOR switch is used to navigate around the display. In Master mode, the cursor is used to advance
through the parameters in the display, allowing you to make edits and changes. In Preset Mode, the cursor
is used to enter the Preset naming operation. Press
CURSOR
to get into cursor mode, and press
MASTER
or PRESET to exit cursor mode.