background image

MINITAUR

Congratulations on your new Minitaur Analog Bass Synthesizer, a powerful, compact 

Moog synthesizer with a classic one knob per function design. At only 8.5" x 5.25" 

and less than 3lbs, the Minitaur puts legendary analog Moog bass into a package 

designed to fit seamlessly into all of your performance and production environments. 

The Minitaur will bring you many happy years of creative and sonic enjoyment. We 

are sure you are anxious to start playing, so refer to the “Getting Started” guide or look 

over the Setup and Connections section to get going. At some point, we encourage 

you to spend some time with this manual to discover all that the Minitaur has to offer. 

Don’t forget - Experimentation and learning will reward you with a lifetime of 

rich synthesizer experiences.

IMPORTANT SAFETY INSTRUCTIONS

PLEASE READ BEFORE USING THIS PRODUCT

When using the Minitaur, these basic precautions should always be followed.

1. Read all the instructions before using this product.

2. Do not use the Minitaur near water.

3. This product, in combination with an amplifier and headphones or speakers,
may be capable of producing sound levels that could cause permanent
hearing loss. Do not operate for a long period of time at a high volume level
or at a level that is uncomfortable. If you experience any hearing loss or
ringing in your ears, you should consult an audiologist.

4. Keep the Minitaur away from heat sources such as radiators, heat registers,
and other products that produce heat.

5. The product should be connected to a power supply only of the type
described in the operating instructions.

6. The power supply should be unplugged from the outlet when left unused
for long periods of time.

7. Care should be taken so that liquids are not spilled into the front panel.

8. The Minitaur should be serviced by qualified personnel when:
 

a. Objects have fallen, or liquid has been spilled onto the product.

 

b. The product has been exposed to rain.

 

c. The product does not appear to operate normally or exhibits

 

    a marked change in performance.

 

d. The product has been dropped or the enclosure damaged.

DANGER -- INSTRUCTIONS PERTAINING TO RISK OF FIRE, ELECTRIC
SHOCK, OR INJURY TO PERSONS: 

Do not open the chassis. There are no

user serviceable parts inside. Refer all servicing to qualified personnel only.

 

 

!

Содержание MINITUAR





















Отзывы: