2.2.0 System Configuration
Configuration / System
Under the
Configuration
section, select the
System
tab to perform the following operations:
•
View product model information, current firmware version and serial number.
•
Specify a custom name; this name can be used by third-party software to display a selected name for the device.
-
Enable edge recording by checking the box “Use Recorder Module” checkbox. Disabling edge recording will accelerate
the device’s boot time.
-
To enable edge recording an SD card must be added to the camera interface card, located on the EXO pan/tilt device.
SD cards are not provided as a standard feature standard option
. Directions for installing the SD card are provided
in the first section of this installer manual
Block 11
. Edge recording set up is done through the Recording Tab in the Live
Viewer EXO screen.
-
Note: Recording menu will only be displayed when user recorder module check box is selected. You must save,
and then reboot to complete selection.
-
SD Card: Use 2GB to 32 GB Micro SD Card of class 6 or above. You must make sure the card is formatted to
FAT32 or EXT3.
Содержание EXSP7C2-2
Страница 5: ......
