background image

9 Start-up

Preparations

© Moog GmbH User Manual "D633-A Series" (CA80942-001; Version 1.0, 12/08) 47

9.1 Preparations

Preparations for start-up

The valves may only be started up when the following is ensured:

• The higher-level machine with all of its installed components complies

with the latest versions of the relevant national and international regula-
tions, standards and guidelines (such as e.g., the EU Machinery Directive,
the regulations of the trade association and of TÜV or VDE).

• The valves and all of the other installed components are in a technically

fault-free and operationally reliable state.

• No signals which can lead to uncontrolled movements in the machine are

transmitted to the valves.

Ö

Chapter "2.1 Intended operation", page 5

9.2 Start-up of the valves

Procedure for start-up

Procedure:

1.

Make sure that all of the machine components, connections and ports
conform to the specifications of the machine manufacturer and operator.

2.

Prepare the hydraulic system.

Ö

Chapter "9.3 Filling and flushing the hydraulic system", page 48

3.

Establish the valve hydraulic connection.

Ö

Chapter "7.3 Mounting the valves", page 38

4.

Establish the valve electrical connection.

Ö

Chapter "8 Electrical Connection", page 41

5.

Make sure that all of the mechanical, electrical and hydraulic connections
are correctly established.

6.

Start-up of the hydraulic system.

Ö

Chapter "9.4 Start-up of the hydraulic system", page 49

Содержание D633-A Series

























































































Отзывы: