Moog D633-A Series, Руководство пользователя

Страница: 27 / 88

3 Product Description Nameplate
© Moog GmbH User Manual "D633-A Series" (CA80942-001; Version 1.0, 12/08) 19
3.5.2 Type Designation
Type Designation
The valve type designation is set out as follows:
3.5.2.1 Valve version identification
Valve version
identification
(1st position in type
designation)
The valve version identification, i.e., the 1st position in the valve type designa-
tion, indicates the version of the valve.
Overview of type designation:
Ö
Chapter "3.5 Nameplate", page 18
1 2 3 4 5 6 7 8 9 10
A
• •
K
•
5
• • • • •
valve version identification
Ö Chapter "3.5.2.1 Valve version identification", page 19
rated flow identification
Ö Chapter "3.5.2.2 Rated flow identification", page 20
maximum pressure identification
Ö Chapter "3.5.2.3 Maximum pressure identification", page 20
command signal identification
Ö Chapter "3.5.2.10 Command signal identification", page 23
valve connector identification
Ö Chapter "3.5.2.9 Valve connector identification", page 23
sealing material identification
Ö Chapter "3.5.2.8 Sealing material identification", page 22
Y-identification
Ö Chapter "3.5.2.7 Y-identification", page 22
fail-safe identification
Ö Chapter "3.5.2.6 Fail-safe identification", page 22
linear force motor identification
Ö Chapter "3.5.2.5 Linear force motor identification", page 21
bushing-spool identification
Ö Chapter "3.5.2.4 Bushing-spool identification", page 21
The 2nd position of the valve type designation consists of two characters.
Type designation:
1 2 3 4 5 6 7 8 9 10
A
• •
K
•
5
• • • • •
Ident. Valve version
A Servovalve (DDV) with bushing-spool assembly, without integrated electronics
Table 5: Valve version identification in the type designation
valve version identification