Moog Claravox Centennial, Руководство пользователя

Страница: 55 / 77

54
Claravox Centennial software, select Fixed
Mode, and enable MIDI Pitch Out. Use the
Note Number parameter to select the base
MIDI Note Number from which pitch will bend
up and down. Then, an initial Note On message
must be sent in order for Claravox to begin send-
ing a continuous stream of Pitch Bend messages.
To send a Note On message, begin with your
volume hand inside of the Volume Antenna loop
and raise. When properly calibrated, a Note On
message will be sent when the volume hand is
approximately 1 cm above the Volume Antenna.
To send a Note Off message, place your hand
back inside the Volume Antenna loop. Finally,
adjust the Pitch Bend Range parameter to deter-
mine the sensitivity of MIDI Pitch Bend values
to Pitch Antenna CV changes. High Pitch Bend
Range amounts result in a wider playable range
with lower resolution, Low Pitch Bend Range
amounts result in a narrower playable range
with higher resolution.
NOTE: If the receiving device is able to re-
spond to MIDI RPN 0 (Pitch Bend Sensitivity),
Claravox will automatically configure the cor-
rect pitch bend relationship for that device.
Chromatic Mode
In this mode, quantized MIDI Note Numbers
are sent without any Pitch Bend data. The
Note Numbers that are sent reflect the Quan-
tize Scale settings of the active preset. To begin
using Chromatic Mode, first navigate to MIDI
Settings in the Claravox Centennial software,
select Chromatic Mode, and enable MIDI Pitch
Out. Then, an initial Note On message must
be sent in order for Claravox to begin sending
Quantized MIDI Note data. To send a Note On
message, begin with your volume hand inside
of the Volume Antenna loop and raise. When
properly calibrated, a Note On message will be
sent when the volume hand is approximately 1
cm above the Volume Antenna. To send a Note
Off message, place your hand back inside the
Volume Antenna loop. Claravox will only send
MIDI Note Numbers while Note is On.
NOTE: Since Note Number and Pitch Bend
Range parameters have no effect in this mode,
those parameters will become inactive in the
Claravox Centennial software while in Chro-
matic Mode.
Working With Other Gear