SHOW
$OORZVWKHWLWOHWREHGLVSOD\HG3UHVV]RRPLQWR
WXUQWKLVRQ]RRPRXWWRWXUQLWRII
PRIVATE
'HWHUPLQHVLIWKLVZLOOEHDSULYDF\]RQH3UHVV]RRP
LQWRWXUQWKLVRQ]RRPRXWWRWXUQLWRII
RLIMIT
6HWVWKHSDQULJKWOLPLWIRUWKH]RQH7KHFXUUHQWSDQ
OLPLWZLOOEHGLVSOD\HG3UHVV]RRPRXWWKHSLFWXUHZLOOUHDSSHDU
and you will have pan control. Pan to the desired location. Press
]RRPLQWRVHOHFW7KHQHZSDQOLPLWZLOODSSHDU
LLIMIT
6HWVWKHSDQOHIWOLPLWIRUWKH]RQH7KHFXUUHQWSDQOLPLW
ZLOOEHGLVSOD\HG3UHVV]RRPRXWWKHSLFWXUHZLOOUHDSSHDUDQG
you will have pan control. Pan to the desired location. Press
]RRPLQWRVHOHFW7KHQHZSDQOLPLWZLOODSSHDU
NOTE: The picture will displayed whenever you are in RLIMIT
or LLIMIT. When you toggle to any other sub-menu the
picture will disappear.
CAMERA -
7KH³&$0(5$´VXEPHQXLVXVHGWRFRQWUROVHYHUDORI
the camera’s parameters. PAN RIGHT to access the sub-menu. TILT
'2:1WRDFFHVVHDFKLWHP
NOTE:
:KHQWKLVVXEPHQXLVDFFHVVHGWKHFDPHUDSLFWXUHZLOO
UHWXUQWRDOORZDGMXVWPHQWV
STABILIZER
6WDELOL]HUZKHUHHTXLSSHGFRPSHQVDWHVIRUVPDOO
PRYHPHQWVRUYLEUDWLRQVZKHQWKHFDPHUDLV³]RRPHGLQ´3UHVV
]RRPLQWRWXUQWKLVRQ]RRPRXWWRWXUQLWRII
DAY/NIGHT
- This is used to control the low light mode of the
camera. There are three choices:
AUTO - The camera will automatically switch into day/night
mode for low light conditions.
DAY - The camera will be in the day mode continuously.
NIGHT - The camera will be in the night mode continuously.
3UHVV]RRPLQWRF\FOHWKURXJKWKHFKRLFHV3
SHUTTER
- Selects between auto and manual shutter speeds.
3UHVV]RRPLQWRF\FOHXSWKURXJKWKHVHOHFWLRQVRU]RRPRXW
to cycle down.
BACKLIGHT
&RQWUROVEDFNOLJKWFRPSHQVDWLRQ3UHVV]RRPLQ
WRWXUQWKLVRQ]RRPRXWWRWXUQLWRII
AGC
- Selects automatic AGC or minimum AGC (0db). Press
]RRPLQWRWXUQWKLVRQ]RRPRXWWRWXUQLWRII
DIGI ZOOM
7XUQVWKHGLJLWDO]RRPRQDQGRII3UHVV]RRPLQ
WRWXUQWKLVRQ]RRPRXWWRWXUQLWRII
ALARM -
7RJHWWRWKLVVHFWLRQWLOWGRZQIURPWKH&$0(5$PHQX
This menu allows the user to control the operation of the alarm input.
,IWKHDODUPLVHQDEOHGWKHFDPHUDZLOOJRWRSUHVHW3UHVV]RRP
LQWRHQDEOHSUHVV]RRPRXWWRGLVDEOH
ZONES -
8SWR]RQHVPD\EHVHOHFWHGHDFK]RQHKDVDQXPEHU
RISDUDPHWHUVDVVRFLDWHGZLWKLW3DQ5LJKWWRDFFHVV=RQHV=21(
1" will display.
7LOWXSRU7LOWGRZQWRVHOHFWWKH]RQHGHVLUHG2QFHWKH]RQHLV
selected, "Pan Right" to access the sub-menu.
TITLE
- Displays the current title.
SET TITLE
7KLVLVXVHGWRVHWWKHWLWOHRIWKH]RQH7KHFXUUHQW
]RQHWLWOHZLOOEHGLVSOD\HGDWWKHERWWRPRIWKHVFUHHQZLWKDW
question mark (?) at the cursor position. Use pan right or left to
FKDQJHWKHFXUVRUSRVLWLRQ:KHQWKHGHVLUHGSRVLWLRQKDVEHHQ
selected, use tilt up and tilt down to select the character to be
GLVSOD\HG3UHVV]RRPLQWRVHWWKHWLWOHDQGH[LWWKHVXEPHQX
3UHVVLQJ]RRPRXWZLOOUHVWRUHWKHRULJLQDOWLWOH
SYSTEM INFO -
Displays the Pan Version, Tilt Version, Current Pan
Position and Current Tilt Position.
PRESETS -
Allows the selection of the dwell times for each of the 64
SUHVHWV:KHQWKLVVXEPHQXLVVHOHFWHGWKHGZHOOWLPHIRUHDFKRI
the 64 presets is displayed.
NOTE:
If a preset has not been saved, the dwell time for that
preset will only be displayed as ".."
REMINDER:
A dwell time of more than "0" can only be selected if
a preset has been saved.
Press "tilt up" or "tilt down" to select the desired preset.
Pan right and the dwell time selection will appear. Press "tilt up"
or "tilt down" to change the time.
- 5 -
