MOOD Lia H40B, Инструкция по эксплуатации

Страница: 45 / 82

ORDINARY SEWING
Cut the center of the buttonhole : be careful not
to cut any stitches on either side. Use a pin as
a stopper at the bar tack so you do not cut too
much.
When sewing buttonholes on stretch fabric, hook
heavy thread or cord under the buttonhole foot.
Attach the buttonhole foot and hook the gimp
thread onto the back of the presser foot.
Bring the two gimp thread ends to the front of
the foot and insert them into the grooves, then
temporarily tie them there. Lower the presser
foot and start sewing.
Set the stitch width to match the diameter of the
gimp thread.
Once sewing is completed, pull the gimp
thread gently to remove any slack, then trim off
any excess.
Please Note:
It is suggested that you use interfacing on the
backside of the fabric.
Making a buttonhole on
stretch fabrics
44
Please Note:
When cutting the buttonhole with the seam
ripper, do not place your hands in the cutting
direction, otherwise injuries
may occur
.