6
WARNING!
Do not tighten the screws completely until the product
has been fully assembled. If you do tighten them completely at an
early stage, significant problems could occur during the further
assembly of the product.
Maintenance and care
Turn off the lamp, remove the batteries and allow the light bulb/lamp to cool completely. Only wipe
them with a damp cloth. Clean the lamp without aggressive cleaning agents, cleaning alcohol or other
chemical solutions. This can damage the case or even affect its function. Replace the batteries of the
remote control as soon as the lights no longer respond to its commands. Replace the batteries of the
lamps as soon as the luminosity decreases considerably. The LEDs are permanently installed and
cannot be replaced.
Assembly
1.
Open the lamp by unscrewing the right side panel.
2.
Now you can insert the hooks into the rail through the opening.
3.
Place the side panel back on the lamp and screw it back in place.
Use
1.
Turn the lamp on or off using the on/off toggle switch.
2.
As soon as the lamp is connected to the power supply, you can use the two integrated earthed
sockets (max. 15,8A) and the two 5V 1A USB charging ports as power sources for other
devices.
3.
Various things can be hung up on the integrated hooks
