18
19
www.DeubaXXL.de
www.DeubaXXL.de
18
19
www.deubaxxl.de
www.deubaxxl.de
Common Faults
Reasons
The motor does not start when 1. There is no power supply.
2. A cable is broken or frayed.
3. There is a fault with the
switch.
4. The capacitor has burnt out.
5. The limit switch has not been
reset or there is a fault with it.
6. The thermal switch has a
broken wire.
1. Turn on the power.
2. Check the cable then
reconnect it.
3. Get the switch repaired or
changed.
4. Change the capacitor.
5. Check the limit switch and
replace it if necessary.
6. Wait for the device to cool
down to replace the thermal
switch.
switch, the motor makes a lot
weight.
1. The mains voltage is too low.
2. The capacitor is damaged.
3. The brake is not fully rele-
asing.
1. Reduce weight.
2. Replace the capacitor.
3. Send the device to a specialist.
does not work or the device
slips down too far.
1. A brake spring is broken.
2. A brake disc is worn.
3. A brake disc is dirty.
Send the device for repair.
The noise level increases abnor-
mally.
1.
-
2. The gears and bearings are
3. Incorrect assembly or impact
damage.
1. Lubricate the device well.
2. Replace the gears and/or
bearings.
3. Check the assembly and/or
get the impact damage re-
paired.
The pulley has an electric cur-
rent.
1. The earthing is not connected
correctly or none is present.
2.
touching the casing.
1. Check the earthing and con-
nect it correctly as applicable
for the device.
2. Check the internal connec-
The limit switch is not working
1.The limit switch is faulty.
2.The limit switch is obstructed.
1. Check the limit switch and re-
place it.
2. Check the trip switch and get
it repaired or replaced.
10. Before every task, operate the device in jog
Only then should you start the device. It is
11. The limit switch is a safety feature to prevent
the weight from exceeding its limits. It should
12.
you should press the on switch as quickly
a specialist for repair.
13. To prevent parts from deforming, it is
forbidden to allow the weight to hang in mid
machine, please do not carry out any repairs
or checks on it.
14.
Lubricate every 6 months.
15. It is forbidden to modify or dismantle any
parts of the pulley.
16. Depending on frequency of use, the pulley
20 hours of use. This should be done at least
once a year.
17.
18. In emergencies or when necessary, press
If the hazard has been removed, turn the
arrow to reset it.
19.
requirements issued by the electric hoist
manufacturer, if you replace the cable (control
cable on the handle).
Disposal:
Once item end-of-life, please dispose valuable
raw materials for a proper recycling. If you are
not sure how to handle it in a correct way please
contact your local disposal or recycling centers
for advice.
Manufactured for:
Deuba GmbH & Co. KG
Zum Wiesenhof 84
66663 Merzig
Germany
Customer Service:
+49 (0)6861 / 901 00 00
Availability: From Monday to Friday from
10am to 6pm
(price of the call will depend on your phone
Feel free to contact us by email. kontakt@
deuba.info Our customer service will reply
your enquiry in the next 24 hours (working
days) and in the next 48 hours (on weekends).