Monty e-bike E-Bike E-48, Руководство пользователя

Страница: 41 / 47

41
16.SOLUTIONS CHART
INCIDENCE POSSIBLE CAUSE SOLUTION
1º
Alter setting the battery
to charge, it seems not
to charge
1. The charger is not
connected properly
2. The battery is not in the
charge position
3. The charger does not
work properly
4. the charger fuse is fused
1. Adjust the connections to ensure
good connection
2. Check the batter position to be
right ( ON/OFF) according to the
model
3. Check the charger light to be on
without being interrupted. Contact
to the technical service in case it
did not blink
4. The fuse must be changed
2º
When turning the battery
key, the charge indicator
does not light up
1. The battery is discharged
on the whole
2. The fuse is out or it is
not well connected
3. the key switch does not
work
1. Check the battery indicator and
recharge if it were necessary
2. verify the fuse and replace it ( See
the technical service section )
3. verify the connections and contact
a technical service if it were
necessary
3º
The engine does not
start when pedalling
1. the battery has not been
connected
2. The brakes are in
function
3. The Pedal assisting is
not connected.
4. The pedal assisting does
not receive any sign
from the pedal
5. it must be a faulty
electric item
1. make sure the battery to be on
position ON
2. The engine is stopped by using the
brake lever, make sure not to press
the brake lever on starting the
vehicle..
3. Some models have the possibility
to disconnect the Assisting
pedalling by and a Red switch set
just under the battery. Make sure
not to be connected.
4. In models with a sensor (magnetic)
transmission, ensure that it is
correctly positioned, just at few
millimeter separating it from the
magnetic support found at the
same height as the left connecting
rod.
5. check the fuse and the electric
connections. See the relevant
section.
4º
The engine is stopped
alter having moved just
a few meters or when
climbing a not very
steep hill
1. The engine has not
received the pedalling
force
2. The cable has been
detached from the
battery
3. The sensor is out of
place
1. Ensure the pedalling to be
properly. The engine is to be
activated on receiving the pedal
working. If the pedalling goes
slowly or interrupted by the brakes
, the engine is to stopped
2. Make sure the battery to be
connected correctly
3. Check the position of the sensor to
be right.