10
5. Setting up the device
Menu level
Parameterization level
Selection of the input signal,
Default:
The current loop device has a 4-20 mA measuring input as the works calibration
(without application of the sensor signal) and
as the sensor calibration (with
the sensor applied). Confirm the selection with
[P]
and the display switches back
to menu level.
Setting the display time,
:
Default:
The display time is set with
[▲] [▼]
. The display moves up in increments of 0.1 up
to 1 second and in increments of 1.0 to 10.0 seconds. Confirm the selection by
pressing the
[P]
button. The display then switches back to the menu level again.
5.3. Programming interlock
Activation/deactivation of the programming lock and completion of the
standard parameterization,
Default:
Choose between the deactivated key lock
(works setting) and the activated
key lock
with the aid of the
[▲] [▼]
keys. Make the selection with
[P]
. After
this, the display confirms the settings with
"
, and automatically switches to
operating mode. If
was selected, the keyboard is locked. To get back into the
menu level, press
[P]
for 3 seconds in operating mode. Now enter the
(works
setting
) that appears using the
[▲] [▼]
keys plus
[P]
to unlock the keyboard.
appears if the input is wrong.
then