8
3.1.4. Display Panel & Indicator Lamps
(H)
The Display Panel
(H)
provides you with the following information:
- A ‘countdown’ display showing the remaining time the selected
programme has left to run.
- A visual indicator showing when the filter requires cleaning (See
Section 4.2.) However, you are advised to check and clean the
filter at the end of every cycle.
- A visual indicator showing when the condenser requires cleaning
(See Section 4.3.) However, you are advised to check and clean
the condenser at the end of every cycle.
- A visual indicator showing when the water container requires
emptying (See Section 4.4.) However, you are advised to empty
the container at the end of every cycle.
3.1.5. Programme Sequence Lamps
(I)
The lights will display the progress of the selected programme from
overdry protection, through to the end of the cycle.
3.2.
Programme Selections
3.2.1. Preparation
‘Press’ open the door and place items into the drum one at a time.
Ensure that all items are loose and not folded tightly. Also ensure
that everything has been removed from pockets and that any zips
have been fastened.
‘Press’ close the door and check that none of the items have been
trapped between the door and the drum.
3.2.2. Select the Programme
Turn the programme selector knob (A) in a clockwise direction to
the required programme. The start/pause light will flash
3.2.3. Start the Programme
Press the start/pause button (B) to start the programme cycle.
