“STAIN WASH” Button
By pressing this button, which can only be activated in the
Cotton
cycles, the sensors in the
new system come into operation. They affect both the selected temperature, keeping it at a
constant level throughout the wash cycle, and the mechanical function of the drum.
The drum is made to turn at two different speeds at crucial moments. When the detergent
enters the garments, the drum rotates in such a way that the detergent is distributed in a
uniform manner; during the wash and rinse procedures, however, the speed increases in
order to maximise the cleaning action. Thanks to this special system, the efficiency of the
wash procedure is improved WITHOUT ANY INCREASE IN THE LENGTH OF THE
PROGRAM.
D
The option buttons should be selected before pressing
the "Start/Pause" button.
“EXTRA RINSE” button
This option allows you to add one rinse at the end of the washing cycle and is useful for people
with delicate and sensitive skin, for which a small amount of detergent residue can cause
irritations or allergies.
It is advisable to also use this function for the children clothes and for the washing of heavily
soiled items, which requires a lot of detergent to be used, or for the washing of toweling items
whose fibres mostly have the tendency to hold the detergent.
E
F
“DELAY START” button
This button allows you to pre-programme the wash cycle to delay the start of the cycle for up
to 24 hours.
To delay the start use the following procedure:
Set the required programme.
Press the button once to activate it (h00 appears on the display) and then press it again to set
a 1 hour delay (h01 appears on the display); the pre-set delay increases by 1 hour each time
the button is pressed, until h24 appears on the display, at which point pressing the button
again will reset the delay start to zero.
Confirm by pressing the "
Start/Pause
" button (the light on the display starts to flash). The
countdown will begin and when it has finished the programme will start automatically.
11
