25
•
When the appliance is in use and depending on the programme selected there can be
hot water in the pump. Never remove the pump cover during a wash cycle, always wait
until the appliance has finished the cycle, and is empty. When replacing the cover,
ensure it is securely re-tightened.
•
Make sure that
before
using for the first time after removing the filter you check and
make
sure there are no leaks.
Cleaning The Drain Pump Filter
•
Be careful as the water left in the appliance may be very hot !!
Allow water to cool before attempting to drain the washer or cleaning
the filter.
Unplug the appliance to avoid any risk of electric shock while removing
the filter
1
3
！
Warning!
Caution!
MAINTENANCE
•
•
1.
The drain pump filter is located behind the cover on the front-lower right corner of the
washing machine.
Before attempting to remove the filter place a container and a towel on the floor to collect
the water left in the machine.
2.
Loosen the filter by turning anticlockwise and wait for the water to fully drain before
removing the filter fully
, dependent on the amount of water inside the washer you may need
to tighten the filter and repeat the process a few times until all the water has drained
3.
Clean the filter and remove any foreign objects from inside the filter housing
4.
After cleaning replace the filter and tighten clockwise ensuring it is fully tightened and the
cover closed.
2
4
