Safety
Information
Proper use of
Refrigerator
Maintenance of
Refrigerator
Trouble
shooting
Trouble
shooting
Appendix
EN-12
2.2 ENERGY SAVING TIPS
•
The appliance should be located in
the coolest area of the room, away
from heat producing appliances or
heating ducts, and out of the direct
sunlight.
•
Let hot foods cool to room
temperature before placing in the
appliance. Overloading the appliance
forces the compressor to run longer.
Foods that freeze too slowly may
lose quality, or spoil.
•
Be sure to wrap foods properly, and
wipe containers dry before placing
them in the appliance. This cuts
down on frost build-up inside the
appliance.
•
Appliance storage bin should not be
lined with aluminum foil, wax paper,
or paper toweling.Liners interfere
with cold air circulation, making the
appliance less efficient.
•
Organize and label food to reduce
door openings and extended
searches.Remove as many items as
needed at one time, and close the
door as soon as possible.
2.3 CHANGING THE LIGHT
•
Any replacement or maintenance of
the LED lamps is intended to be
made by the manufacturer, its
service agent or similar qualified
person.
2.4 START TO USE
•
Before initial start, keep the
refrigerator upright for a minimum of
4 hours before connecting it to
power supply.
•
Before placing any fresh or frozen
foods, the refrigerator should have
run for 2 - 3 hours, or for above 4
hours in summer when the ambient
temperature is high.
•
NOTE
This product is not recommended for use
with sockets or main switch with the A/
GFCI function, otherwise it may cause
false tripping.
1. it’s not pose a safety risk when tripped.
2. If tripping persists, it is recommended
to replace the sockets or main switch
without A/GFCI function.
