6
Section 1. Installation
N.B. Full Dimensions are shown in Section 5. (Page 12)
A qualified installer must carry out the installation.
This appliance can be used fully ‘vented’ via a ducting hose (not supplied)
and external wall vent, or in ‘re-circulation’ mode by using the charcoal filter
provided.
You must use a charcoal filter in re-circulation mode. Do not
fit a charcoal filter when venting to the outside.
Position the hood against the wall where it will be sited and mark out the
position of the two (2) fixing holes.
Drill two (2) 8mm holes and fix the body of the hood to the wall using the
fixings supplied.
Position the one way valve into the cooker hood
Drill four (4) 6mm holes into the base of the overhanging cupboard/panel and
fix the hood to the cupboard/panel.
If externally venting, you will need to cut a hole for the vent hose in the
cupboard/panel.
