Section 6. Maintenance and Cleaning
Unplug your machine before starting the
maintenance and cleaning of your machine.
Turn the water off before starting the maintenance
and cleaning of your machine.
CAUTION: Your machine’s parts might be damaged
if cleaners with solvents are used.
Do not use cleaning materials containing solvents.
Water Inlet Filters
On the tap side of your machine
’s water inlet hose and at the ends of
water inlet valves, there are filters to prevent the entry of dirt and
foreign materials in the water to the machine. If the machine is unable
to receive sufficient water although the water tap is opened, these
filters should be cleaned.
Remove the water inlet hose.
Remove the filters found on the water inlet valves by using pincers
and wash thoroughly using a brush.
Clean the filters of the water inlet hoses located on the tap side by
washing thoroughly using a brush.
After you clean the filters, re-fit them in the reverse manner to which
they were removed.
CAUTION:
Filters of water inlet valves may be clogged due to a contaminated
tap or lack of maintenance. Broken seals will cause water to leak into
your machine continuously.
Any breakdown that arises due to these reasons are out of the scope
of warranty.
20
