Section 1. Installation
-
IMPORTANT!
This appliance must be left to stand in an upright
position for at least 4 hours before being switched on for the first time.
-
Remove all packaging and securing tape from the appliance.
-
Wash the interior of the appliance with lukewarm water containing a
small amount of bicarbonate soda (5ml to 0.5 litres of water).
-
Your appliance should never be used outdoors.
-
Position the appliance in a dry atmosphere and out of direct sunlight.
-
Do not position next to a cooker or other sources of heat, i.e. radiator.
-
If positioned next to another fridge or freezer, leave a minimum gap of
2cm between the appliances in order to avoid condensation.
-
A clearance of 150mm should be left above the appliance. If this
cannot be achieved you should ensure a clearance of 25mm is
maintained on each side of the appliance.
-
Please ensure that there is a small
‘air-gap’ between the condenser
on the rear of the appliance and the rear wall.
-
Do not place or store heavy items on the top of this appliance.
-
Ensure that the appliance is positioned on a firm flat floor.
-
This appliance must be level. Adjust the level by screwing the
adjustable feet up or down (use your fingers or a suitable spanner).
-
Ensure that the appliance is upright and both feet are in firm contact
with the floor so that the cabinet is stable.
-
Connect the plug to an adjacent 13amp socket outlet and ensure
that the appliance is not standing on the supply cable.
-
The appliance may give off an odour when it is operated for the
first time. This odour will fade away as your fridge starts to cool.
