![montpellier MON-CT251 Скачать руководство пользователя страница 8](http://html1.mh-extra.com/html/montpellier/mon-ct251/mon-ct251_installation-and-operating-instructions-manual_1830904008.webp)
8
Section 1. Installation
-
Remove all packaging, protective film and securing tape from
the appliance.
-
Position the appliance in a dry atmosphere.
-
The following dimensions are provided as a guide for
installation – your installer will carry out the installation in
accordance with the current regulations.
-
Your installer will connect the power cable in accordance with
the current regulations.
To install this appliance, please proceed as follows:
1.1.
Work-Surface Cut-Out
-
Cut out the work-top as shown in the drawing below, ensuring
that the actual sizes used are as per the chart below.
-
For installation and use, a minimum of 5cm must be
maintained around the cut-out.
-
The work surface must have a thickness of at least 30mm.
-
The work surface must be heat resistant.
1.1.1. MON-CT251