10
Section 4. Maintenance
4.1. Cleaning the Main Filter
Periodically remove the filter and wash with warm soapy water. Ensure the filter
is dry before re-fitting.
The main body of the cooker hood should be cleaned with warm soapy water –
never use abrasive detergents on either the filter or main body.
4.2. Replacing the Lamps
To replace a LED Lamp, isolate the power, press and remove the lamp holder
as shown below. Replace it with the same type/wattage (3w) and refit.
4.3. Replacing the Charcoal Filter
To replace the charcoal filter(s), proceed as shown in Section 1. Installation.
4.4. What to do if something goes wrong
The light(s) does not work:
- The LED lamp has probably blown. Replace the lamp as referred to in
Section 4.2. Please note that light bulbs are not covered by any
guarantee offered with this appliance.
Motor operates but level of extraction appears to be poor:
-
Check and clean the filter as detailed in Section 4.1. Dirty filters will
cause a noticeable drop in performance. If you are using the appliance
on ‘re-circulation’ mode the charcoal filter may require changing as
detailed in Section 4.3.
