EN - 13
3 USING THE APPLIANCE
3.1 Information on Less Frost
Technology
Thanks to the wrap around evaporator,
Less Frost technology offers more efficient
cooling, less manual defrost requirement,
and more flexible storage room.
3.2 Thermostat Setting
The thermostat automatically regulates the
temperature inside the cooler and freezer
compartments. Refrigerator temperatures
can be obtained by rotating the knob
to higher numbers; 1 to 5
Important note:
Do not try to rotate
the knob beyond position 1, it will stop
your appliance from working.
Super switch
Thermostat knob
Lamp cover
(The images are representative)
Thermostat settings:
1 – 2 :
For short-term storage of food
3 – 4 :
For long-term storage of food
5
:
Maximum cooling position.
The appliance will work longer
the
higher the number selected
.
If required,
change the temperature setting
to suit
individual needs.
Super Switch:
This switch can be used as
a Super Freezing switch or as a Winter
Switch.
Super freezing:
For maximum
freezing capacity, please
turn on this switch
24 hours
before
placing
fresh food
in the freezer
. After
placing
fresh food in the freezer, 24 hours
of using
this setting
is generally sufficient. In order
to save energy, please turn off this switch
after 24 hours from
placing fresh
food
in
the freezer.
Winter Switch:
If
the ambient
temperature
is below 16
o
C, this switch shall be used
as
winter switch and it keeps your fridge
above 0
o
C while freezer is below -18
o
C in
low
ambients
.
3.3 Temperature Settings Warnings
•
Your appliance is designed to operate in
the ambient temperature ranges stated
in the standards, according to the climate
class stated in the information label. It
is not recommended that your fridge is
operated in the environments which are
outside of the stated temperature ranges.
This will reduce the cooling efficiency of
the appliance.
• Temperature adjustments should be
made according to the frequency of
door openings, the quantity of food kept
inside the appliance and the ambient
temperature in the location of your
appliance.
•
When the appliance is first switched on,
allow it to run for 24 hours in order to
reach operating temperature. During this
time, do not open the door and do not
keep a large quantity of food inside.
• A 5 minute delay function is applied
to prevent damage to the compressor
of your appliance when connecting
or disconnecting to mains, or when
an energy breakdown occurs. Your
appliance will begin to operate normally
after 5 minutes.
