montpellier MICL122, Руководство пользователя, Страница: 13 / 16

EN - 12 -
If your fridge is not cooling sufficiently enough:
Your fridge is designed to operate in the ambient temperature intervals stated in the
standards, according to the climate class stated in the information label. W e do not
recommend operating your fridge out of stated temperatures value limits. This will reduce
the cooling efficiency of the fridge.
Recommendations
• In order to increase space and improve the appearance, the « cooling section » of
refrigerator is located inside the back wall of the refrigerator compartment. If this
wall is covered with frost or water drops when the compressor is running, do not
worry. This is quite normal. The appliance should be defrosted only if an
excessively thick ice layer forms on the back wall.
• If the appliance will not be used for a long perios of time (for example during the
summer holidays), set the thermostat knob to the « • » position. Defrost and clean
the refrigerator leaving the door open to prevent the formation of mildew and
sm ells.
Tips for saving energy
1. Install the appliance in a cool, well ventilated room , but not in direct sunlight and
not near a heat source (radiator, cooker.. etc). Otherwise use an insulating plate.
2. Allow warm food and drinks to cool down outside the appliance.
3. Cover drinks or other liquids when placing them in the appliance Otherwise humidity
increases in the appliance. Therefore, the working time gets longer. Also covering
drinks and other liquids helps to preserve smell and taste.
4. Try to avoid keeping the doors open for long periods or opening the doors too
frequently as warm air will enter the cabinet and cause the compressor to switch
on unnecessarily often.
5. Keep the covers of the different temperature compartments (crisper, chiller ...etc )
closed
6. Door gasket must be clean and pliable. Replace gaskets if worn.