montpellier MFF183ADX, Инструкция по установке и эксплуатации

Страница: 10 / 36

Installing and operating your fridge freezer
Before using your fridge freezer, you should pay attention to
the following points:
• The operating voltage for your fridge freezer is 220-240 V
at 50Hz.
• We do not accept responsibility for any damages that
occur due to ungrounded usage.
• Place your fridge freezer where it will not be exposed to
direct sunlight.
• Your appliance should be at least 50 cm away from stoves,
gas ovens and heater cores, and at least 5 cm away from
electrical ovens.
• Your fridge freezer should never be used outdoors or
exposed to rain.
• When your fridge freezer is placed next to a deep freezer,
there should be at least 2 cm between them to prevent
humidity forming on the outer surface.
• Do not place anything on your fridge freezer, and install
your fridge freezer in a suitable place so that at least 15
cm of free space is available above it.
• Use the adjustable front legs to make sure your appliance
is level and stable. You can adjust the legs by turning them
in either direction. This should be done before placing food
in the fridge.
• Before using your fridge freezer, wipe all parts with a
solution of warm water and a teaspoon of sodium
bicarbonate, then rinse with clean water and dry. Place all
parts in the fridge after cleaning.
• Install the plastic distance guide (the part with black vanes
at the rear) by turning it 90° (as shown in the figure) to
prevent the condenser from touching the wall.
• The refrigerator should be placed against a wall with a free
space not exceeding 75 mm.
EN
10
BEFORE USING THE APPLIANCE