Hints and Tips
1. The induction hob cannot be turned on.
Make sure the induction hob is connected to the power supply and that it is switched on.
"^ $
call a qualified technician.
2. The touch controls are unresponsive.
% <2 & your induction cooktop for instructions.
3. The touch controls are difficult to operate.
% y be using the tip of your finger when touching the controls:
Make sure the touch control area is dry and use the ball of your finger when touching the controls.
6. The induction hob makes a low humming noise when used on a high heat setting.
This is caused by the technology of induction cooking: This is normal, the noise should quieten down or disappear
completely when you decrease the heat setting.
7. Fan noise coming from the induction hob.
A "
^ ff: %
induction hob off at the wall while the fan is running.
8. Pans do not become hot and “ ” appears in the display.
The induction hob cannot detect the pan because it is not suitable for induction cooking. The induction hob cannot detect
# <2
& Z [
# #
9. The induction hob or a cooking zone has turned itself off unexpectedly, a tone sounds and an error code is
displayed (typically alternating with one or two digits in the cooking timer display).
Technical fault: Please note down the error letters and numbers, switch the power to the induction hob off at the wall, and
contact a qualified technician.
4. The glass is being scratched.
T02 $ <2
&Z [ Z [
5. Some pans make crackling or clicking noises.
This may be caused by the construction of your cookware (layers of dif fferently): This is normal,
the noise should quieten down or disappear completely.
Failure Display and Inspection
" $
<
%
6 ger or damage to the induction hob.
Problem
2
Possible causes
What to do
The appliance
does not work
Break in power supply
Please check the main power is normal; if the leakage protection switch is off; if there is a blown fuse,
replace it with a new one; if the main power is normal, check if the plug is connect with socket
appropriately; If the hob is wire connection type, disconnect the power, check if the wire is loose;
disconnect the power, check if main plug is of}+1 $ $
$
the unit stop work.
f
!
Input power too low
Input power too high
Thermistor of coil short circuit.
Thermistor of coil open circuit.
Too high temperature
of IGBT thermistor.
Too high temperature
of coil thermistor.
IGBT thermistor short circuit
IGBT thermistor open circuit
Please check if set delay off function. If set delay off function, the unit will stop once delay off time out.
! $ 6Q # cuit fault, please send the
+>
+J
7
@
+C
+7
G
FA
V$ J9?;6
N $0 t. ;6Q$
'$ 1>C?;6
N $0 the unit. ;6Q$
& rN 6Q$
Too high temperature of IGBT thermistor$N $0 "
$ r$ $
$ "zQT temperature sensor open circuit /short circuit.
T 6Q"zQT$
Too high temperature on induction glass surface, please check if there is no water in pan. After
$ " $ossible that sensor of cooktop failure, send to
& "zQT thermistor connection errorN "zQT6Q $
