6
- Once the hob is in position, ensure the fixing brackets are
positioned overlapping the under-side of the work-surface and
then tighten the bracket screws to secure the hob into
position.
1.3. Electrical Connection
These appliances require an electrical connection for the
spark ignition only. Connect the wires to a 3 Amp Plug,
(protected by a 5amp fuse) and plug into a standard,
switchable 13 Amp socket behind the housing unit.
Please note that a switchable spur should be accessible
above the work surface in order that the power can be turned
off.
Green/Yellow = Earth
Blue
= Neutral
Brown
= Live
1.4. Gas Connection
This appliance must be installed by a ‘Gas Safe’ engineer.
Your
approved ‘Gas Safe’ engineer will ensure that your appliance is
connected in accordance with the current regulations.
