montpellier GH60BG, Инструкция по установке и эксплуатации

Страница: 11 / 15

1 0
Section 3. Operating the Appliance
3.1. Igniting & Operating the Gas Burners
-
Push in and turn the required burner control knob anti-
clockwise to the maximum heat setting (Large flame).
-
You will hear an audible click from the spark ignition.
-
Continue to maintain pressure on the control knob for a few
seconds after the burner has ignited and the flame is stable.
-
If you fail to maintain pressure on the control knob, the burner
will either not light or the flame will go out.
-
Once the flame is stable you can turn the burner down to a
lower heat setting, if required.
-
When you have finished using the burner, turn the burner
control knob back to the ‘off’ position and beware that the
burner and pan support will remain hot for a period of time.
3.2. Hot Burners and Pan Supports
Please note that the gas burners, burner caps and pan supports
will remain very hot for some time after the burner has been
switched off. You must take care until the parts have cooled down
completely.
Never, clean the hob surface, burners and/or pan supports until
they have cooled down completely.