7
Section 2. Installation
-
Remove all packaging, protective film and securing tape from the appliance.
-
Position the appliance in a dry atmosphere.
- The following dimensions are provided as a guide for installation
– your installer will
carry out the installation in accordance with the current regulations.
- This appliance must be connected by a suitably qualified electrician who will connect
the power cable in accordance with the current regulations.
To install this appliance, please proceed as follows:
2.1 Work-Surface Cut-Out
2.2 Securing the Hob
Apply the self-adhesive sealing tape all the way around the lower edge of the cooking
surface as seen in the below diagram. Screw the 4 worktop mounting brackets on the
side walls of the product.
Now position the hob into the work surface cut-out to secure it into place.
