montpellier CHG903MSS, Инструкция по установке и эксплуатации

Страница: 6 / 14

6
Section 1. Installation
 A qualified installer must carry out the installation.

This appliance can be used fully ‘vented’ via a ducting hose and external wall
vent, or in ‘re-circulation’ mode by using the charcoal filter provided.

You must ensure that the appliance is horizontal (See Fig. 1 below).
 The cooker hood should ideally be installed between 65-75cm above the
work surface/cooker hob. DO NOT INSTALL BELOW 65cm (See Fig. 2
below).
 List of installation accessories (See Fig. 3 below).

Fit the installation plate and chimney installation plate to the wall (See Fig. 4
below).
 Fit the exhaust pipe, chimney and glass to the main body (See Fig.5 below).

Hang the hood onto the installation plate (See Fig. 6 below).
 Connect the exhaust hose and then secure to the chimney installation plate
(See Fig.7 below).
 Connect the chimney extension to the hood (See Fig. 8 below).

Ensure that the appliance has been attached to the wall securely!
 The mains lead/plug should be connected to a suitably positioned fused
electrical spur, protected by a 13amp fuse.