Section 3. Operating the Appliance
3.1. Operating the Hob
It is important that you use only metal pans specifically
designed and/or approved for use on Electirc Hobs.
Never allow melamine or plastic containers to come in
contact with the heat zones.
To operate the required solid plate heat zone, simply turn
the relevant control knob to the required heat setting, i.e. 1 is
low and 6 is high.
Always make sure that the control knob is turned back to zero
when you have finished using the hob.
The pan you use should have a thick flat base with a diameter
equal to the solid plate diameter that you are using.
N.B. The red neon indicator will light up when there is power to
the hob.
1
0
